Loyverse POS works with receipt printers on the Supported Printers list. However, for iOS devices, you can try to connect Ethernet receipt printers' models that are not on the Supported Printers list. But be aware that not every printer may work with Loyverse POS!
These are the general requirements for a receipt printer to be compatible with Loyverse POS on iOS devices:
- support ESC/POS commands that are the same as Epson printers;
- have an Ethernet interface.
Consult the printer manual or the manufacturer website to see if your receipt printer fits these requirements. If so, the printer may work with Loyverse POS; however, there might be special cases.
Connect your mobile device to the Wi-Fi router and connect your Ethernet printer to the router via an ethernet cable (details: How to Set Up an Ethernet Printer in Loyverse POS).
Then, in the Loyverse POS app, go to Settings.
Create a printer by tapping on the ‘+’ button.
Name your printer in the ‘Name’ field and select ‘Other model’ from the drop-down list of printer model.
Fill in the ‘Printer IP-address’ field, which can be found in your printer's network configuration report (details: Troubleshooting When Setting Up an Ethernet Printer)
Chose the paper width of your printer.
Tap the ‘Print test’ button to check your printer’s connection with the Loyverse POS app.
If a test receipt prints out successfully, then your printer is set up correctly.
Сhoose the settings for your printer depending on how you want to use it. Don't forget to save all settings at the end by tapping the ‘Save’ button.
Now you can see your printer on the list. You are ready to start selling and printing receipts or orders.